EnCalcOL Formulae |
Version: 1.2
Size: 459KB
Released: 14-May-2012 |
 |
EnCalcOL uses the following formulae to calculate the results:
Actual Resultrs
Days |
= |
Tank Reading Date 2 - Tank Reading Date 1 |
Total Oil Used |
= |
Volume in Tanks on Tank Reading Date 1 - Volume in Tanks on Tank Reading Date 2 + Oil Added between Tank Reading Dates 1 and 2 |
Oil Used per Day |
= |
Total Oil Used / Days |
CO2 Generated (Kg) per Day |
= |
Volume of Oil Used * CO2 Conversion Factor / Days |
Oil Used per Day |
= |
Total Oil Used / Days |
Predicted Results
Predicted Days |
= |
Date 1 + No Months To Predict Forward |
Predicted Total Oil Used |
= |
Total Oil Used * ( Predicted Days / Actual Days ) |
Predicted CO2 Generated (Kg) |
= |
Predicted Volume of Oil Used * CO2 Conversion Factor |
Predicted Fill Up Date |
= |
Tank Reading Date 2 + (Oil Volume Left / Oil Used per Day) |
Below is the list of data range limits for the program. These can also be found by hovering with the mouse over each data box, they will also be displayed in the error pop up when data is outside the allowed limits and the Calculate or Save Defaults buttons are clicked.
Tank Data
Tank Capacity (Litres or Gallons) : 100 - 9999 (No Entry or 0 is also OK for Tank B)
Tank Depth (Centimetres or Inches) : 10 - 300 (No Entry or 0 is also OK )
Tank Readings
Dates: Must be a valid date between 01-Jan-2000 and 31-Dec-2015 (No
Entry is also OK ) (1)
Tank Readings (Litres or Gallons) :
0 - 9999 (2)
Tank Readings (Centimetres or Inches) :
0 - 300 (3)
Notes: Up to 75 characters
Note 1: Tank Reading Date 1 must be at least 3 days before Tank Reading Date 2.
Note 2: Tank Readings must also be less than or equal to Tank Capacity if measured in Litres or Gallons.
Note 3: Tank Readings must also be less than or equal to Tank Depth if measured in Centimetres or Inches.
|
