EnCalcE
FAQ |
Latest
Version: 3.3
Size: 418KB
Released
1-May-2008
|
 |
 |
|
 |
Check the Release Notes and Known Issues
for items not covered here.
Does EnCalcE Work On Both 32bit And 64 bit Operating Systems?
EnCalcE is designed to work on WIndows 2000 Service Pack 4 (32bit), Windows 2003 Enterprise Edition
Service Pack 1 (32 and 64 bit), Windows 2003 Enterprise Edition Release
2 Service Pack 1 (32bit and 64 bit), Windows XP (32bit), WIndows Vista - all variants (32bit and 64 bit). Windows NT, 95, 98 & ME are NOT supported.
My Registration Code Didn't Arrive!
Check out the Registration FAQ for possible causes.
My Registration Code Doesn't Work!
Check out the Registration FAQ for possible causes.
Can EnCalcE Be Installed Over An Existing Version?
Yes, In most cases there are no problems installing over the top of an
existing installation. The only exception to this is
when upgrading from versions 2.3 and below and the user upgrading
is different to the user who originally installed the program,
in this case uninstall the old program first. To keep the default settings
do not allow the configuration file to be overwritten when prompted.
Why Does EncalcE Not Take Into Account The Standing Charge
For Electricity Each Quarter Charged By Some Power Companies?
This is a fixed cost which will not be affected by any savings made.
What Is The Calculation Accuracy?
4 decimal places plus or minus 0.0001.
How Do I Use The Program To Compare Two Items With Different
Hours Of Use?
The only way to do this currently is to do two separate calculations
and manually compare the results. It is planned that a future version
of the program will do this directly.
What Currencies Has EnCalcE Been Tested With?
UK Pounds (£), US Dollars ($) and Euros (
€). It should work OK with other currencies.
How Accurate Is The CO2 Conversion Factor?
The conversion factor is a compromise since the actual figure
is dependent on the mix of capacity used to generate the electricity
used which in practice will vary due to the time of year, the time
of day and the losses is the transmission system which vary with
distance. This factor can be changed from the main screen if required
to suit particular circumstances.
Why Doesn't The Save Defaults Button Work ?
The Save Defaults button will only work if the program is run by
a user with administrative privileges.
|
